How to Glue a Puzzle: 5 Easy Steps and Practical Tips
So you've just completed your jigsaw puzzle masterpiece and want to preserve it for years to come. Learn how to glue a puzzle together with these five easy steps, including how to prepare your workspace, apply puzzle glue and let your finished puzzle dry before framing. Here are practical tips from the Jigsaw Jungle puzzle pros to help you get started.
Reasons to Glue a Puzzle:
Not sure why you should glue your puzzles in the first place? Here are all the reasons why it’s a great idea!
It transforms your puzzle into one, incredibly spectacular, seamless piece
It showcases your long hours of dedicated work
People love seeing the completed work, so share it for everyone to enjoy
It creates a brand new, original piece of art, right there in your own home, created by you
You do not have to break it up right after you worked so many hours on it
Gluing your finished jigsaw puzzles is a great way to save your puzzle to enjoy for a lifetime!
How to Glue a Puzzle
Follow these five easy steps to learn how to use puzzle glue and keep your completed jigsaw puzzle together for display.
STEP 1:
To begin gluing a puzzle, cut a piece of wax paper (parchment also works). Make sure you leave some room around the sides, as this will prevent any shifting that may occur after you flatten the puzzle.
STEP 2:
On the wax paper, place the puzzle face up and flatten the pieces as you work. To ensure that all pieces are flat, you can use a rolling pin.
STEP 3:
Next, apply a suitable puzzle glue or Mod Podge Puzzle Saver to the flattened puzzle. Spread a thin, even layer with the recommended applicator, including along the edges, without soaking the cardboard.
STEP 4:
It’s time to WAIT. You should wait until the front of the puzzle is completely dry before gluing the back.
STEP 5:
Let the puzzle glue dry and cure fully before framing. Follow the product label; allowing up to 24 hours can be a cautious approach when its instructions permit.
Preparing to Glue Your Puzzle
The best way to glue a puzzle is to put a protective covering on the workspace to keep your area clean and prevent a big, sticky, gluey mess!
Use some wax or parchment paper and carefully slide it under your completed puzzle (Note:We caution you NOT to use newspaper as it can leave you with a very big mess as it tends to stick to your puzzle and your table).
Be sure to leave a few extra inches or so around all sides of the puzzle. You might find it helpful to get a second set of hands to hold the puzzle in place while you work the wax or parchment paper underneath. The reason for this maneuver is to protect your table from excess glue that may or may not seep through the puzzle piece cracks and save both your puzzle and your workspace!
Once the wax or parchment paper is under the puzzle with some excess on all sides, gently use a rolling pin to make sure the entire puzzle is as flat as you can get it! The flatter, the better, so get rolling! You’re ready to spread the glue!
Pick the right glue for the job! There are several types of glue on the market: Liquid, Spray, Powder, Glue Sheets, etc., all made by different companies and all having different advantages.
Explore our puzzle glue and accessories to find suitable products for preserving and storing your finished puzzle.
Getting Started
First things first, pick a puzzle you love that you will enjoy looking at time and time again! We have thousands of puzzles to choose from which will make your choices seem endless. Whether you're working on a 100, 500, 750, 1000, 1500, 2000, 3000, or a larger puzzle, they can all be glued and featured on your wall! For your next project, explore our 1000 piece puzzles for more artwork worth preserving.
Now that you've just completed your favorite Ravensburger, White Mountain, Clementoni, Jumbo, Cobble Hill, Ceaco, Lafayette, Educa, Eurographics, Springbok, Masterpieces, D-Toys, NYPC, Trefl, Karmin, SunsOut, Gibsons, Falcon, Vermont Christmas, Pomegranate, Melissa & Doug, Piatnik, Danawares, PrimeMotion, Anatolian, or any other creation and you want to be able to enjoy it forever; make sure to smooth it out thoroughly and that all the pieces fit together nicely - once you start putting the glue on, it will be too late!
Glue Jigsaw Puzzle
OK, pick your glue, and let's get sticky! You want to choose a glue that seals clear, solid, strong, and has a finish that works well with the finish of your puzzle. The majority of puzzlers generally like using liquid glue because it spreads easily, and evenly and it tends to be a less costly option. Also, no mixing is needed, as it is already prepared for you in the bottle. We like Masterpieces and Ravensburger’s glues because they go easily and dry clear. This allows you to see where you have spread the glue more easily than with clear glue. Dedicated puzzle glues are designed to secure the pieces while providing an appropriate finish. See our Jigsaw Puzzle Glue for a purpose-made option, and follow its application and coverage instructions.
Some manufacturers even include glue inside the packaging for puzzles of 500 pieces or more (Educa, for example, is a manufacturer that has done this for many years). While it's not required, it's never a bad idea to use a brand of glue that was manufactured by the same company that produced your puzzle.
IMPORTANT: Make sure you have enough glue to cover the whole puzzle (front and back if you want) before you start gluing. The label on the bottle, box, or packaging should indicate the coverage (size and number of pieces) you can expect when using their product. If the liquid glue you have chosen to use claims to have enough glue to cover 2 x 1000-piece puzzles (a total of 2000-piece coverage), do not attempt to glue your 3000-piece masterpiece with just one bottle or you'll run out of glue before you're done!
The best and easiest way to glue your puzzle is to pour the glue right on top of it and use an applicator, plastic paddle, business card, piece of cardboard, or brush to spread the glue around. Make sure to spread the glue as evenly as possible, paying attention to the edges (some brands include an application paddle or a brush attached to the bottle cap you can use to help you along in the gluing process). Be careful not to brush or spread too much glue at once as it may ruin your hard work, causing the puzzle to peel or swell! You must cover all of the pieces - leave no piece forgotten! Make sure you have enough time to complete the job because once you have started, you'll need to continue until you have finished (don't stop halfway through for anything or you may be sorry). Puzzle glue drying times vary by product, so follow the label and let the adhesive dry completely before moving the puzzle.
As long as you are covering everything completely, don't worry too much about the immediate look. You may notice some small air bubbles throughout, but these will normally shrink as the glue dries, leaving a nice even finish. Again, be careful not to brush or sponge on too much glue at once – it is possible to over-saturate the puzzle causing it to swell or peel and you don't want that happening.
They say "patience is a virtue" and they mean it when it comes to gluing your puzzle! Make sure to let your puzzle dry thoroughly before handling it! Drying and curing times depend on the adhesive, coat thickness and room conditions. Leave the puzzle flat and undisturbed until it is fully dry according to the product instructions. After drying, you should be able to pick up your puzzle - this time in one piece! Once it is dry you can use a ruler or spatula to separate the paper from the puzzle.
More Helpful Puzzle Glue Tips
Did the edges curl up a little after the glue finished drying? Try carefully flipping the puzzle over and applying a coat of glue to the back side of the pieces. Once the glue has dried on the back, it will typically pull itself flat again. Once the puzzle is dry, you can also cover the surface with some wax or parchment paper and place any flat object that is weighted and larger than the puzzle (like a piece of plywood) to press the puzzle flat again. After about a day or so, your puzzle should look great and be ready to frame & hang for everyone to enjoy!
Depending on the finish of your puzzle (glitter, metallic, high-gloss, lenticular, etc.), some adhesives and glues are not ideal, and alternative glue options, like Puzzle Presto Peel & Stick by Buffalo Games & Puzzles or Eurographics Smart Puzzle Glue Sheets, should be used. These products are easy-applied adhesive sheets that can be applied to the back of the puzzle to hold it together in preparation for framing and hanging. Many puzzlers prefer using these options over liquid or powder glues as there is no sticky mess or drying time involved. Some puzzlers like to combine options and choose to apply liquid glue to the front of the puzzle and adhesive sheets to the back, for example.
Whatever your glue-need may be, there are several choices available today to meet your requirements.
If you would like this item added to your order, please contact our customer care team at
1-877-758-6453
or email
service@iroma360.com.
We will be happy to transfer from one of our retail locations to our distribution center to be shipped to you.
